Mopar GCL-WL-SIDE-STEPS Manuel D'installation page 4

_______________________________________________________________________________________________________ 4
Apply the final torque to M6 flange nuts:
Brackets to Vehicle (Pinch Weld): (6X) 6.64ft-lbs (9N-m)
9
Apply the final torque to preassembled M6 bolts:
Brackets to Running Board: (6X) 6.64ft-lbs (9N-m)
10
Apply the final torque:
0
2 Front and Rear Attachment Brackets: 2.1ft-lbs ± 0.6 ft-lbs (2.8 N-m ± 0.6 N-m)
11
Snap access door into rear cladding window
0
ensuring a secure fit with equal clearance gap around window
12
Repeat all steps on the opposite side of the vehicle.
0
13
0
February 2, 2021
2X
www.mopar.com
2X
K6863050