Webasto Pure Instructions D'installation page 3

TR
Replace the charging cable
DANGER
Hazardous voltages in the device
Danger of fatal electric shock.
The charging cable of the Webasto Pure must only be replaced by an
X X
authorised electrician.
Switch off the power supply to the charging station and secure to prevent
X X
restart.
Make sure that the electrical connections are safely isolated from the
X X
power supply.
Do not leave the charging station unattended with the cover open.
X X
Make sure that you have the right cable for 11 kW or 22 kW.
X X
Carefully read the operating and installation instructions before replacing
X X
parts of the Webasto Pure.
Switch off and secure the power supply to the charging station.
X X
Remove the cover, Fig. 01
X X
Open the clamp holding the earth cable PE Fig. 02, PE
X X
Remove the cable clamp Fig. 02, 1
X X
Remove the Webasto Pure from the wall or stand, Fig. 03
X X
Disconnect the conductors of the charging cable Fig. 04, 1 - 5
X X
Replace the charging cable.
X X
Make sure to connect the
1. CP (Black / White)
2. N (Blue)
3. L3 (Grey)
4. L1 (Braun)
5. L2 (Black)
Reassemble and mount the charging station in reverse order. To maintain the
X X
IP 54 protection class, make sure that the grommet is fitted correctly.
Switch on the power supply to the charging station.
X X
Make sure that the charging station successfully completes the self-test to en-
X X
sure its functionality.
3
charging cable
following the sort order 1 to 5: