Polaris GLACIER-II Manuel D'installation page 14

"GLACIER-II" PLOW FRAME
KIT PN 2876150
8. Attach the ends of the cable (#4) to the latches (#2).
9. Insert the carriage bolt (#20), the
M6 X 25mm
washer (#26), and the
M6
ASSEMBLING PIVOT TO FRAME :
10. Assemble the pivot to frame using a
flat washer (#28) and the nut removed in
O.D. X 3mm
step 1.
11. Fasten the locking arm (#7) to the right (#5) and left
(#6) locking arm bracket using the
bolt (#14) and the nylock nut (#24).
M8
NOTE : Do not overtighten. The locking arm (#7)
should be free to rotate.
2510160
A-2510160 (F-Polaris) Rév. B
lock
M6
nut (#21).
16mm I.D. X 30mm
hex
M8 X 25mm
- 7 -
12. Fasten the locking arm assembly to frame using the
hex bolts (#14) and the
(4) M8 X 25mm
nuts (#24).
13. Attach one end of the lever spring (#11) onto the
locking arm (#7) and the other end to the
carriage bolt (#20). Secure with the
(#23).
nylock
(4) M8
M6 X 25mm
nylock nut
M6