Battery Replacement; Care And Maintenance - Trotec BY10 Manuel D'utilisation

Masquer les pouces Voir aussi pour BY10:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12

05. Battery replacement

Battery replacement is necessary if the display on the LCD
display 1 becomes faint.
1. Carefully open the battery compartment lid 6 on the
back of the measuring instrument by loosening the
screw 5 on the battery compartment lid 6 with a
screwdriver.
2. Now remove the battery compartment lid 6 and replace
the spent batteries with two new 1.5 V batteries. Ob-
serve the polarities as shown inside the battery com-
partment.
3. Now close the battery compartment again and tighten
the screw 5 on the battery compartment lid 6.
B - 4

06. Care and maintenance

Clean the device with a moist, soft, lint-free cloth. Take
care that no moisture enters the housing. Do not use
sprays, solvents, cleaning agents containing alcohol or
scouring agents; use only clean water to moisten the
cloth.
2002/96/EC of 27 January 2003 regarding used electrical
and electronic equipment. Please dispose of this equipment
in accordance with the applicable legal regulations when its
service life is ended.
Operating Manual – Tyre Pressure Measuring Instrument BY10
Electronic equipment may not be disposed of as
domestic waste, but must be correctly dispo-
sed of in accordance with the EUROPEAN PAR-
LIAMENT AND EUROPEAN COUNCIL Directive
EN

Publicité

Table des Matières
loading

Table des Matières