Westfalia 323092600001 Notice De Montage page 2

SIARR
23 - 23
ASSEMBLY
* Position the support A under the vehicle in front of the
existing holes with V nuts and bolts, without tightening.
NOTE : Usually, it is possible to fasten the nuts
and bolts V without removing the bumper.
* Attach the arms C and the support of the ball joint D
with the W nuts and bolts, without tightening.
* Attach the arms C on either side of the chassis
with the nuts and bolts X and Y.
FINISHING
* Tighten all the nuts and bolts
to the torque indicated as follows.
FASTENING KIT
2 off HM12x110 screws
2 off M12 nuts
V
2 off CS12 washers
2 off 12-20 flat washers
2 off HM16x55 screws
W
2 off DEC16 washers
2 off HM16 nuts
2 off HM16x45 screws
Z
2 off DEC16 washers
2 off HM16 nuts
M16 AC8.8 19,5daNm M12
M16 AC10.9 27,5daNm M10
M12 AC8.8 8,1daNm M10
ASSEMBLY INSTRUCTIONS
1 off HM10x130 screw
1 off HM10 nut
X
1 off 10-22 flat washer
1 off CS10 washer
1 off spacer
1 off HM10x130 screw
1 off HM10 nut
Y
1 off10-22 flat washer
1 off CS10 washer
TORQUES :
AC10.9 11,4daNm M8 AC8.8
AC8.8 4,7daNm M8 AC10.9
AC10.9 6,7daNm
!
Affix the sticker in the position
Type Type
Approval No.
Tow bar for
LAND ROVER e11*94/20*00*1482
Discovery mod.99
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
FICHIER : BUREAU\NOTICEDEMONTAGE\WESTFALIA\NDM2323-D - FOLIO NDMANG
323092600001
Max. Total Max. Total
Authori. Weight Towable Weight
2 900 kg 3 500 kg
Max. Verti- Value
cal load D
120 kg 15,60 kN