This appliance MUST only be serviced by an authorized person.
Wear the correct Personal Protective Equipment during installation.
Also follow the applicable safety regulations.
Ensure that the type of gas & pressure match the specification of the
appliance. You can find the specification on the data badge.
Pay close attention to the current regulations on ventilation in the
country of use.
The installation MUST provide for adequate air supply for combustion
to the burners, safe removal of combustion products and avoidance of
accumulation of unburned gases.
If it is not possible to install the appliance in accordance with this
instruction, please refer to Thetford for further guidance.
For more information about ventilation regulation & requirements, see
Position & placement.
9