Before Installation; Position And Placement - Thetford SHB16950Y Mode D'emploi Et D'installation

6. Installation
Serviceability
If not installed to instructions detailed herein, we the manufacturer cannot be held responsible for any
problems that occur, or poor performance either perceived or witnessed.
The installer of Thetford products is responsible for correct installation according to the Thetford
installation instructions to ensure the functionality and serviceability of the product.
In terms of serviceability, this means that a dealer or authorised Thetford service partner must be able to remove
and re-install the Thetford product within the time that is allowed according to the Thetford time-list, using
standard tools and equipment.
This is to claim any warranty during the warranty period after the purchase date.
In case of any queries on this subject, a Thetford local service representative can be contacted for additional
support related to the installation of the product.

Before installation

Check the contents of the box:
▪
SHB16950Y
▪
Template
▪
Surface and flush mountings seals
▪
Fixing clamp (4x)
▪
User & Installation Manual
If something is missing from the box, please contact your dealer.

Position and placement

This appliance can be positioned using surface/ flush mounting.
▪
Remove all the packaging materials from the appliance
▪
Place the template on the worktop to check dimensions.
The template provides 2 options:
1. A for surface mounting
2. B for flush mounting. Flush mounting has the extra rebate, not a full cut-out for the area
between A and B.
▪
Draw the sizes and dimension on the worktop as shown below.
11