Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Control panel

Here you can see an overview of the control panel. The design
depends on the respective appliance model.
Explanations
1
Switch for the electric grill
2
Switch for the gas burner
3
Cooker switch
4
Multi-function button
5
Ignition button
Switch for the electric grill
You can set the desired temperature by turning the switch for
the electric grill clockwise.
Positions
Zero position
ÿ
200-270 Temperature
range
Grill
(
1, 2, 3
Grill settings
Switch for the lower gas burner
Turn the switch for the gas burner anti-clockwise to set the
desired temperature.
Positions
Zero position
ÿ
170-270
Temperature
range
Heat setting for the lower burner: 3 kW
Function
Oven not hot.
Temperature for grilling using the
electric grill in °C.
Power settings for the grill
Setting 1 = low
Setting 2 = medium
Setting 3 = high
Function
Oven not hot.
Temperature range in ºC for
baking cakes in baking tins,
pizza on the baking sheet, bis-
cuits etc.
Burner knob
You can adjust the heat setting of the hotplates using the four
burner knobs.
The Positions
Zero position
þ
Settings area
˜
There is a limit stop at the end of the settings area. Do not turn
the timer beyond this.
Setting
0
Off position
1-6 Heat settings
When you switch on a hotplate, the indicator lamp lights up.
Multi-function button
You can use this button to set 3 different functions.
The electric grill and rotary spit are switched on at the same
time when you press the multi-function button. The oven light
comes on
To switch it off, press the multi-function button again.
Ignition button
This button activates the electronic ignition system.
When you press the button, all igniters ignite at the same time.
Function/gas oven
The oven is switched off.
Large flame = highest setting
Economy flame = lowest setting
Hotplate/function
The hotplate is switched off.
1 = lowest output
6 = highest output
31

Publicité

Table des Matières
loading

Table des Matières