Publicité
Les langues disponibles
Les langues disponibles
2. Remove LATCH/UAS strap from
storage location
seat. Use LATCH/UAS release on
LATCH/UAS connectors and pull
up to remove.
3. Extend the LATCH/UAS strap.
For easier installation, extend the
LATCH/UAS strap to its maximum
length by pressing the grey
button and pulling on the strap.
4. From back of seat, unfasten
the right side of the cover from
seat shell. Feed LATCH/UAS
connectors down, keep under
the cover and out the bottom.
Once completed, refasten the
cover to seat shell.
5. Place car seat rear-facing in
back seat of the vehicle. Center
the car seat between the vehicle
LATCH/UAS anchors. The entire
seat bottom should sit flat on the
vehicle seat.
34
1
on back of
Radian® 3RX
1
2
3
4
5
Publicité
