Diono Radian 3RX Mode D'emploi page 28

FIRST SETUP
INFANT SUPPORT
To ensure a better fit for smaller
infants, we recommend using the
infant head and body support cushion
included with your car seat. Use of this
cushion is optional and does not affect
the safety of the seat.
ADJUSTING THE HEADREST
IMPORTANT:
third harness slot, the headrest may now be
used at its lowest position.
1. Carefully unfasten the fabric panels by detaching
the fabric fasteners located on the upper sides and
beneath the headrest.
2. Position hand as shown, tilt
the top of the headrest slightly
towards you and slide upwards.
NOTE:
You might need two hands.
28
When your child fits at the
Radian® 3RX