Brizo T75P5 Serie Manuel D'installation page 6

2
Diverter Cartridge Installation
A.
1
4
3
FOR DIVERTER CARTRIDGE INSTALLATION:
Apply a light coating of plumbers grease on the
diverter cartridge and sleeve (4) and the o-ring (2)
to make the diverter sleeve (3) easier to install on
diverter cartridge.
Install diverter cartridge (1) assuring that the
locating pin on the bottom of the cartridge aligns
with mating hole in rough-in body.
Slide diverter sleeve (3) over cartridge stem
aligning tabs on the diverter sleeve with slots in
rough-in body (5).
106855 Rev. C
5
2
B.
1
5
For Bonnet Installation
Slide bonnet nut (1) over diverter sleeve (2) and
thread into rough-in body.
NOTICE: Over tightening may lead to property
damage or product failure.
6
2
Hand tighten securely.