Detailed Setup Guide; Battery Installation - La Crosse Technology WS7034UITCA Manuel D'instructions

have up to 10 feet of resistance. Your distance plus resistance should not exceed 330 feet in a straight
line.
NOTE: Fog and mist will not harm your temperature sensor, but direct rain must be avoided.

DETAILED SETUP GUIDE

BATTERY INSTALLATION

1. First, insert the batteries to the Temperature sensor (see "Temperature sensor" below).
2. Within 2 minutes of powering up the sensor, insert the batteries to the Temperature Station (see
"Wireless Temperature station" below). Once the batteries are in place, all segments of the LCD
will light up briefly. Following the indoor temperature and the time as 12:00 will be displayed. If they
are not shown in LCD after 60 seconds, remove the batteries and wait for at least 60 seconds
before reinserting them. Once the indoor data is displayed user may proceed to the next step.
3. After the batteries are inserted, the Temperature Station will start receiving data signal from the
sensor. The outdoor temperature should then be displayed on the Temperature Station. If this
does not happen after 2 minutes, the batteries will need to be removed from both units and reset
from step 1 and the signal reception icon is no longer shown.
All manuals and user guides at all-guides.com
- When one Temperature sensor is being used
6