Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
QUICK SETUP
Hint: Use good quality Alkaline Batteries; avoid rechargeable batteries.
1.
Have the Wireless Temperature Station and temperature sensor 3 to 5 feet apart.
2.
Batteries should be out of both units for 5 minutes.
3.
Place the batteries into the Temperature sensor first and next into the Wireless Temperature
Station.
4.
DO NOT PRESS ANY BUTTONS FOR 5 MINUTES.
In this time the Wireless Temperature Station and the temperature sensor will begin to communicate with
each other, and the display will show both the indoor temperature and an outdoor temperature. If the
Wireless Temperature Station does not display both temperatures after the 5 minutes, please retry the set
up as stated above. After both indoor and outdoor temperatures are displayed for 5 minutes you can
place your temperature sensor outdoors, and set your time.
The temperature sensor should be placed in a dry, shaded area (ex: under the eve of a roof). The
temperature sensor has a range of 330 feet. Any walls that the signal will have to pass through will
reduce distance. An outdoor wall or window will have up to 20 feet of resistance and an interior wall will
All manuals and user guides at all-guides.com
5
Publicité
Table des Matières
