How To Place Calls; How To Answer A Call; Hands-Free Mode; Adjusting The Listening Volume - ProMinent TULIP Notice D'instructions

How to place calls

In pre-dialling: dial the telephone number and press the key
With line seized: Keep pressed for at least 1 second the
the key and dial the number you wish to call).
In case of error press the

How to answer a call

When the handset is not placed on its base: press the
press the
When the handset is placed on its base and the automatic answer is enabled (see Chapter 17 for the settings needed for activation),
lifting the handset will be sufficient to answer the call. When the automatic answer is disabled, press the
answer. During the ring tone phase the red LED on the base will flash intermittently and the display will show, on a case by case basis:
"External call", when the caller number identification service is not active on the telephone line.
The telephone number of the caller (after the first ring tone), when the caller number identification service is active on the telephone line.
"Number concealed", when the caller number identification service is active but the latter voluntarily conceals its own telephone
number.

Hands-free mode

During the conversation press the
Adjusting the listening volum
Press the keys

Options during the conversation

During the conversation you can press the function keys (left "Menu" or right "Phonebook") or R to access the following options:
PHONEBOOK: to access the phonebook (see the "Phonebook" chapter in this manual).
MIC MUTE: to disable your microphone. To enable it again, press the right key ENABLE.
LISTENING VOLUME: press directly the
handsfree).
INTERNAL CALL: to place the external caller on hold and call another handset associated with the TULIP base. Once the called
handset will answer, it will be possible to perform a three ways conference by pressing again OPTIONS > CONFERENCE.
R KEY (Flash): To exploit possible supplementary services provided they are offered by the telephone company and enabled on
the line. Refer to your own provider for details on the use of such functions.

Sounds (melodies, volume, deactivation/reactivation)

To select a Melody: press Menu > HANDSET > SOUND > EXTERNAL MELODY (or INTERNAL) > MELODY > OK.
Choose the desired sound with
Adjusting the Volume: press Menu > HANDSET > SOUND > VOLUME > OK.
Set the volume with
Disabling the sound: press Menu> HANDSET > SOUND > VOLUME> OK.
To move within the submenu VOLUME with

Setting date and time

Press MENU > BASE > TIME SETTING. Type in the date in the "dd.mm.yy" format, type in the time in the "hh.mm" (24
hours) format by using the

Setting the clock or alarm

To set the clock/alarm, press MENU > EXTRA MENU > ALARM. Move within the submenu using the
option and press EDIT to select "SINGLE" or "EVERYDAY", press OK and then SAVE.
Go to TIME and insert the time for the alarm in the format "hh.mm" (24 hours), press OK and then SAVE.
Repeat the same operations to change the melody (MELODY), to let the alarm sound again (REPEAT) and to select the cycle in
minutes for repeating the alarm (CYCLE).
When the alarm is enabled, the relevant icon will appear on the display in standby

Keypad lock

Keep pressing the # key to activate the keypad lock. When the keypad lock is active, the symbol
stand-by. To reactivate the keypad, keep pressing the # key.

Searching the handset ("Paging" key)

If you are no more able to find your handset (or another handset associated with the TULIP base) shortly press the Handset Sear-
ching ("Paging") key on the base. The LED on the base will flash intermittently and all handsets associated to that base will start to
ring. Press again the Handset Searching key on the base or any other key on the handset to stop the ring tone.
User Manual mod.
tto_guida_22072011_v.indd 17
key and start again. During the call the red LED on the base will blink.
key terminate the call.
key to activate the hands-free mode and press it again to deactivate this mode.
to adjust the listening volume during the conversation (both normal and in hands-free mode).
and confirm with OK.
and confirm by pressing OK.
keys to move through the various fields and press OK when terminated.
At the time programmed for the alarm, the handset will play the alarm melody. To stop it, press any
key on the handset.
. Use the C key to delete any digit that was inserted by mistake.
key and dial the number you wish to call. (You can also press
key or any key to answer. Once the conversation is over,
keys to adjust the listening volume during the conversation (both normal and
, go to the None option and confirm with SAVE.
key or any other key to
keys, go to the MODE
.
will appear on the display in
7
25/07/2011 11:12