Olympia CC 310.4 Mode D'emploi page 17

Clearing Residual Material
1. Turn the rotary knob to OFF and set the main switch to
The Power LED goes out and the device is no longer in operation.
2. Disconnect the power plug from the power socket.
CAUTION!
• Risk of injury through the sharp edges of the cutting mech­
3. Remove the residual material carefully from the cutting mechanism using an
appropriate pointed object.
Emptying the Waste Bin
The waste bin as a capacity of about 19 litres. To prevent material from jamming,
we recommend emptying the waste bin regularly.
1. Turn the rotary knob to OFF.
2. Pull the waste bin out of the device by the handle.
3. Empty the waste bin.
4. Install the waste bin back in the device.
Lubricating the Cutting Mechanism
To ensure a long service life for the device, it is essential to oil the cutting mecha­
nism at regular intervals.
ATTENTION!
• Property damage!
1. Apply the special oil for shredders in several lines square to the sheet of paper.
2. Insert the oiled sheet of paper in the paper infeed.
GO Europe GmbH offers a special paper oil for shredders. Please contact
the Service hotline (refer to Guarantee).
Paper Shredder CC 310.4 / MC 306.2
anism!
Never reach into the cutting mechanism.
Keep fingers and hands away from the paper infeed.
Do not use spray oils.
Only use a special oil intended for shredders.
Gi
Operating the Paper Shredder
O
(Off).
17