Samsung Dryer Manuel De L'utilisateur page 39

Rack Dry (applicable models only)
Some models come with a drying rack which is inserted into the drum at the factory. If your model came
with a drying rack, remove the rack from the drum before you use the dryer for the first time. To remove the
rack, pull the rack straight up, and then take it out of the drum. Remove the drying rack from its packaging
and store the rack for later use.
A
Untitled-1 39
If a drying rack is not provided, you can purchase it
at a local Samsung service center. (Part Code : DC93-
00374H)
To use the drying rack, follow these steps:
1. Insert the drying rack (A) inside the tumbler with the
filter handle to the front.
2. Insert the rear legs of the drying rack into the
recessed areas of the rear wall, and then press down
the middle of the drying rack to secure it in place.
3. Put items to dry on the rack. Make sure to leave
space between the items for air flow.
4. Press Rack Dry or other Cycle Setting according to
rack drying suggestions below, then select the drying
time.
5. When the items are dry, remove the them from the
dryer, and then remove the drying rack.
English 39
2022-01-12 11:07:43