Sauder 420568 Mode D'emploi page 14

Step 9
Fill the holes in the LEFT END (EE2) 1/4 to 1/2 full with GLUE (54M).
å
Be sure to fi ll the second and fourth holes from the rounded edge as
shown in the lower diagram.
Fasten the LEFT END (EE2) to the FRONT PANELS (G3 and H3)
å
and BACK PANEL (I3). Tighten four HIDDEN CAMS. Wipe away the
excess glue.
NOTE: Be sure the WOOD DOWELS in the PANELS insert into the
å
holes in the LEFT END.
L e f
t E n
d
EE2
EE2
Rounded edge
Page 14
I3
Rounded edge
Roller end
Roller end
G3
H3
54M
420568
Maximum
Arrow
210 degrees
Minimum
190 degrees
www.sauder.com/service