Sauder 419607 Mode D'emploi page 18

Step 14
If you have already assembled the 419605 Lateral File, you will
å
need to remove the Lateral File Top by loosening the TWIST-LOCK®
FASTENERS in the Ends and Back.
First, fi nish drilling the four large holes shown in the bottom surface of
å
the Lateral File Top using a 1/4" drill bit. Follow the left diagram.
Next, fasten the Lateral File Top to the ENDS (A and B) using four
å
BLACK 2-1/4" FLAT HEAD SCREWS (26S).
NOTE: If you had to remove the Top from your Lateral File, re-attach it
å
to the Lateral File again by retightening six TWIST-LOCK® FASTENERS
in the Ends and Back. Follow the right diagram.
NOTE: If needed, follow the 419605 Lateral File instruction book to
å
fi nish the 419605 assembly.
4 1 9
6 0
5 L
a t e
r a l
F i l
e T
BLACK 2-1/4" FLAT HEAD SCREW
(4 used in this step)
Page 18
B
o p
Finish drilling these four holes.
26S
A
419607 www.sauder.com/services