Hilti ST 2500 Mode D'emploi page 19

Application
Fastening wood to metal
Steel grade: ST 37 up to 12 mm
Steel grade: ST 52 up to 8 mm
Sheet metal to sheet metal
Sheet metal to sheet metal
Sheet metal to steel profile
Sheet metal to steel profile
Sheet metal to wood
Fiber-cement board to steel profile
Fiber-cement board to wood
Sandwich panel to steel profile
Sandwich panel to wood
3.4 Items supplied
Power tool, ST­GT 17 depth gauge, operating instructions.
4 Technical data
For rated voltage, rated current, frequency and/or input power, refer to the country-specific type
identification plate.
If the tool is powered by a generator or transformer, the generator or transformer's power output must be
at least twice the rated input power shown on the rating plate of the tool. The operating voltage of the
transformer or generator must always be within +5 % and -15 % of the rated voltage of the tool.
Rated power input
Weight
Speed (running under no load)
Max. torque
Chuck
Protection class
4.1 Noise information and vibration values in accordance with EN 62841
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can vary. This can
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the total
working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise information
Sound power level (L
pA
Sound pressure level (L
Uncertainty
378507
*378507*
Printed: 24.07.2018 | Doc-Nr: PUB / 5070745 / 000 / 03
)
)
wA
Screw type
Self-drilling wing screws
mit drill point
Type S-WW
S-MD
S-MD
S-MD 51 + S-MD 21
S-MD 53 + S-MD 23
S-MP 53
S-FD 03
S-FD 01
S-CD 63
S-CDW 61
ST 2500
600 W
1.5 kg
0 /min ... 2,200 /min
19 Nm
/ " hex socket positive lock
1
4
II
ST 2500
84 dB
95 dB
3 dB
Diameter Product
in mm
•/• ST 2500
4.2 ST 2500
4.8
5.5
5.5
6.5 ST 2500
6.3 ST 2500
6.5
5.5 ST 2500
6.5
English 13