Twin-Star International BB KIT Instructions De Montage page 10

NOTE: Test the function of the Insert before continuing to
ensure wiring is completed properly.
Place the securing plates (CC) over the flange on the insert. Secure to mounting bracket (DD) with
screws (BB). Once connected the insert should be held in place securely.
BB
CC
A100R1
4
Screws A: 4*8mm 8pcs.
Screws B : 4*15mm 10pcs.
Brackets: Metal 343*101.5*35.4mm, 2
Screws A: 4*8mm 8pcs.
Securing plates: Metal 80*21.5*7mm,
Screws B : 4*15mm 10pcs.
10
[x8]
[x4]