Manuels Connexes pour Twin-Star International BB KIT
Sommaire des Matières pour Twin-Star International BB KIT
- Page 1 BB KIT www.tsicustomerservice.com 1-877-587-1791 Twin-Star International, Inc. Delray Beach, FL 33445 Complete the installation. Made in China • Printed in China • Fabricado en China • Impreso en China • Fabriqué en Chine • Imprimé en Chine A100R1...
- Page 2 Thank you for purchasing a Nous vous remercions d’avoir acheté Gracias por comprar un producto Twin-Star International product, un produit Twin-Star International, de Twin-Star International, designed in the U.S.A. We hope conçu aux États-Unis. Nous espérons diseñado en los EE.UU.
- Page 3 SERVICIO DEPENDABLE UN SERVICE À DE ATENCIÓN CUSTOMER LA CLIENTÈLE AL CLIENTE SERVICE FIABLE FIABLE Questions? Our experts are Vous avez des questions ? Nos ¿Preguntas? Nuestros expertos standing by to assist you at experts attendent votre appel sur están a su disposición a través de our toll-free help line.
- Page 4 SAFETY INFORMATION INFORMACIÓN DE INFORMATION DE SÉCURITÉ SEGURIDAD Please read and understand Assurez-vous de lire et de Lea y comprenda this entire manual before comprendre l’intégralité du completamente este manual attempting to assemble, présent manuel avant de tenter antes de intentar ensamblar, operate or install the product.
- Page 5 HARDWARE [x10] Brackets: Metal 343*101.5*35.4 4x15mm Screw [x8] Screws A: 4*8mm 8pcs. 4x8mm Bolt Screws B : 4*15mm 10pcs. [x4] Securing plates: Metal 80*21.5 Securing Plate [x2] Brackets: Metal 343*101.5*35.4mm, 2 pcs. Mounting Bracket Securing plates: Metal 80*21.5*7mm, 4 pcs. [x1] Frame www.tsicustomerservice.com...
-
Page 6: Pre-Installation
PRE-INSTALLATION (SPECIAL FRAMING INSTRUCTIONS) Model Number Frame Width (A) Frame Height (B) Frame Depth (C) BB Kit - 18 20 3/16” 17 11/16” 9” BB Kit - 23 25 3/16” 20 3/4” 10” BB Kit - 26 28 5/16” 18 3/8”... - Page 7 NOTE: If wall has a rough surface, such as stone, the flange should rest against stone surface in vertical position as shown. Flange Mount the brackets (DD) centered in the opening vertically. The flange should lie flat against the wall. Use screws (AA) to secure the bracket to the framing. Depending on framing materials used, the installer may choose to use screws other than what is supplied with this kit.
- Page 8 NOTE: If the insert has this plastic support bracket it needs to be removed. Unscrew the 1 screw holding the bracket in place, remove the bracket then reinstall the screw. Repeat this step for the other corner. Plastic support bracket Screw [x2] [x2]...
- Page 9 NOTE: Complete wiring of the Insert at this time. Insert flange Place the insert into the opening, push the insert against the bracket (DD) from step 1. The flange on the insert will lie flat against the bracket. 2) Place the insert in the opening, push the insert against the bracket from step 1. The ange on the insert will sit against the bracket.
- Page 10 NOTE: Test the function of the Insert before continuing to Screws A: 4*8mm 8pcs. ensure wiring is completed properly. Screws B : 4*15mm 10pcs. Brackets: Metal 343*101.5*35.4mm, 2 Place the securing plates (CC) over the flange on the insert. Secure to mounting bracket (DD) with screws (BB).
- Page 11 4) Attach the frame to the insert by hooking the top side of the frame to the insert ange as shown. Magnets along the bottom edge will secure the frame to the insert. Attach the Frame (EE) to the insert by placing the frame hooks over the insert flange as shown. Magnets along the bottom edge will secure the frame to the insert.
- Page 12 Installation is now complete. 5) Complete the installation. A100R1...
- Page 13 NOTES REMARQUES NOTAS www.tsicustomerservice.com 1-877-587-1791 Twin-Star International, Inc. Delray Beach, FL 33445 Made in China • Printed in China • Fabricado en China • Impreso en China • Fabriqué en Chine • Imprimé en Chine A100R1...