Table des Matières
Publicité
4.1 Control and adjustment
4.1.1 Control panel description
4.1.2 Temperature settings
(1)Press
, the display start to flash, then press
or
to adjust temperature. Press
again when
finsh setting.
(2)The button
is disabled without pressing
. Press
and hold down for 5 seconds to display the
life of carbon filter (unit: day). Otherwise the display automatically returns to the temperature display after 15
seconds.
Note: Don't press
when displaying the life of carbon filter, or the number of life will be disordered.
(3)The button
is disabled without pressing
. Press
and hold down for 5 seconds to display the
two LED mode:
Stay on mode, displaying symbol "
"
When door opens, displaying symbol
"
". Press
to choose LED mode, then press
when confirm. Otherwise the display
automatically returns to the temperature display after 15 seconds.
（4）Press and hold
for 5 seconds, all output will be cut off including the display and LED. Gently press
to restore all output.
（5） press
and
together at sametime, humidity values will be displayed on the display panel, after 5
seconds, the display should be returned to the original layout automatically.
22
Publicité
Table des Matières
