4.1 Control and adjustment
4.1.1 Control panel description
4.1.2 Temperature settings
(1) Upon temperature zone on the display broad with the symbol "
on the display broad with the symbol "
(2) Press
, the display start to flash, then press
again that the display (flashing) display other zone set temperature, then press
temperature of another zone. 8 seconds if no operation, display board will display real-time temperature.
(3)The button
life of carbon filter (unit: day). Otherwise the display automatically returns to the temperature display after 15
seconds.
Note: Don't press
(4)The button
is disabled without pressing
two LED mode: ①Stay on mode, displaying symbol "
". Press
"
automatically returns to the temperature display after 15 seconds.
(5)Press and hold
" indicates.
is disabled without pressing
when displaying the life of carbon filter, or the number of life will be disordered.
to choose LED mode, then press
for 5 seconds, all output will be cut off including the display and LED. Gently press
" indicates, under temperature zone
or
to adjust temperature of one zone. Press
. Press
and hold down for 5 seconds to display the
. Press
and hold down for 5 seconds to display the
" ②When door opens, displaying symbol
when confirm. Otherwise the display
22
or
to adjust