Tuning In Radio Stations - Eton FRX2 Manuel Du Propriétaire

TUNING IN RADIO STATIONS:

1. Rotate band selector to select your desired band; AM, FM,
then rotate the <frequency dial> to select your desired
station(frequency);
2. The LCD display will read your desired band and
station(frequency).
WEATHERBAND TUNING:
1. Rotate band selector to select WB, then rotate the
<frequency dial> select each WB station until you hear the
strongest WB station for your area.
2. The LCD display will display 1ch,2ch,3ch...7ch.
SETTING THE CLOCK (with radio off)
Long press <tunig dial> to enter clock/alarm setting
function, rotate dial to select ALARM or setting clock (hour
and minute will flash). When hour and minute flashing, quick
press this <tuning dial>, HOUR indicator will flash, rotate the
dial to select hour, then quick press the dial again to enter
select the minutes, minute will flash, rotate dial to select
minutes. Quick press the dial again to exit clock setting.
Note: this radio's time format is 12 hour
SETTING THE ALARM (with radio off)
Long press <tuning dial> to enter clock/alarm setting
function, rotate dial clockwise to select ALARM, so alarm
icon will flash. Use the same setting procedure as clock to
set up hour and minute. Then quick press <tuning dial> once
more, OFF will appear on screen, turn the <tuning dial> to
select OFF/on for alarm function. If selected 'on', <ALARM>
will show on screen. Quick press this <tuning dial> again to
exit ALARM setting.
When alarm goes off, quick press the <tuning dial> to turn it off.
SEEK FUNCTION (with radio on)
This operation only works with AM and FM band.
4
FRX2 OWNER'S MANUAL