Headset Connection And Configuration (Ps4™, Ps4™ Pro) - Tronsmart Shadow Manuel D'utilisation

Headset connection (wired)
The headset can be used as a wired headset with the included 3.5mm audio
cable.
1. Plug the 3.5mm audio cable into the headset jack.
2. Plug the other end of the 3.5mm audio cable into the device.
Headset connection (PC)
1. Insert the wireless transmitter into the USB connector of the PC.
The status indicator of the wireless receiver will flash, indicating that it is waiting
for connection.
2. Press and hold the power button on the headset for 3 seconds to turn on the
power.
3. When the status indicator light of the wireless transmitter and the red indicator
light on the headset is on, it indicates that the headset has been successfully
connected.
Note: If this is your first time using this headset, you need to set the headset as
a preset input and output device.
Headset connection and configuration (PS4™, PS4™ Pro)
1. Turn on your PS4™ game console.
2. Connect the wireless adapter to the USB port on the PS4™. The wireless
adapter status indicator will flash to indicate that it is waiting to connect.
3. Press and hold the power button of the headset for 3 seconds to turn it on.
4. When the wireless adapter status indicator and the headset LED indicator are
always on, it means that the headset is connected.
03