iStorage cloudAshur Guide De Démarrage Rapide page 3

How to change Admin PIN
1. Unlock your cloudAshur hardware security module with
the default Admin PIN (11223344) as described under 'First
Time Use' .
2. With the
KEY ( ) button 3 times (KEY ( ) x 3) within 2 seconds.
LED will change to solid
3. With the device in Admin Mode (solid
and hold down together both 'KEY ( ) + 2' buttons. LEDs
will change to blinking
Enter your NEW 7-15 digit Admin PIN and Press the KEY
4.
( ) button once.
BLUE
the
5. Re-enter your NEW Admin PIN and press the KEY ( )
button once.
solid indicating the Admin PIN has been successfully
changed.
To exit Admin Mode (solid
the SHIFT (
RED and then fades out.
To unlock your cloudAshur hardware security module with your
unique Admin PIN follow the steps in the heading 'Unlocking
with the Admin PIN' .
Unlocking with the Admin PIN
Press and hold down the SHIFT (
1.
second. The
2. In Standby State (solid
button once.
3. Enter your Admin PIN and press the KEY ( ) button
GREEN
again.
cloudAshur has been successfully unlocked as Admin.
Note: Once your cloudAshur hardware security module
has been successfully unlocked, the
remain blinking for 30 seconds only, during which time your
cloudAshur needs to be connected to a powered USB port.
GREEN
LED blinking on and off, press the
GREEN
LED will remain solid.
BLUE LED will rapidly blink and then become
BLUE
) button for one second, LED becomes solid
RED LED will become solid.
GREEN
and
LED will blink on and off indicating the
BLUE (Admin Mode).
GREEN and solid BLUE.
LED will continue to blink and
LED), press and hold down
RED LED) press the KEY ( )
BLUE
LEDs blink together.
GREEN
3
BLUE
LED) press
) button for one
LED will