Table des Matières
Publicité
TC4-NVS
4
Deactivating the Temperature Curve
Set the selection knob to SET POINT /TEMP. CURVE. The current
temperature set point flashes on the display.
Press the push-button to display the points of the curve actually
defined until the word ON appears (fourteen clicks).
Turn the adjustment knob counterclockwise one notch and leave in
this position for at least 10 seconds. The word OFF flashes on the
display and after 10 seconds, the Temperature Curve Pilot Light turns
off indicating that the temperature curve is now deactivated.
Set the selection knob to AMBIENT.
22
TC4-NVS.rev.04
Publicité
Table des Matières
