Gbr User Manual; Important Safety Instructions - Lumme LU-2405 Mode D'emploi

Космос Фар Вью Интернешнл Лимитед
Оф. 701, 16 апарт., лейн 165, Рэйнбоу Норс Стрит, Нинбо, Китай
Сделано в Китае
Организация, уполномоченная принимать претензии на тер. РФ/Уполномоченное изготовителем лицо:
Спутник, улица Центральная, строение 58А, помещение 419А, тел/факс 8(812) 325-2334
ООО «Волна», Россия, 195220, г. Санкт-Петербург, Гражданский пр., д. 41, лит. А, оф. 407, 8(812) 3252348
Импортер:

GBR USER MANUAL

IMPORTANT SAFETY INSTRUCTIONS

Please read this instruction carefully in order to avoid damage due to incorrect use and keep it in a safe place for future references.
 Incorrect handling can cause damage to the device and cause damage to the user.

For home use only. Do not use for industrial purposes.

For indoors use only.

Close supervision in necessary when it is used near children.

Do not leave the appliance switched on when you do not use it.

Do not operate after malfunction or after the fall of the appliance.

Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service center.

Do not use the appliance if you have any physical or mental disability and have no any operational experience with similar technics. In such cases the user must have the operating instructions from
the person which in charge of security arrangement of the user.

Do not use the appliance into a bathroom or near a water supply source. Do not touch the appliance by wet hands.

Before putting the appliance in storage it must be completely cooled down.

Do not use the appliance near water or near water-filled tubs, basins, sinks or other containers.
OPERATING INSTRUCTIONS

To connect the nozzles simply insert them in the slot of

To disconnect, pull them out.

Before disconnecting or connecting the nozzles make sure the speed switch is in the

To switch on, set the switch at
SAWING AND NAILS SHAPING DISCS

Discs (A, B) are designed for shaping and sawing thick and thick nails. Use the nozzle that is most suitable for the thickness of your

Nozzle A - Disk for sawing and nails shape (less rough)

Nozzle B – Disk for sawing and nails shape
DISC FOR POLISHING

Used to give a smooth and rounded nails after they are processed, and for polishing the surface of the nail at the end of the manicure /
nozzles.
I position.
(more rough)
ООО «Валерия», РФ, 188670, Ленинградская область, Всеволожский район, территория ПР
"0"position.
6
nails.
pedicure.