Heating Control; Speed Control - Royal Sovereign RTHD-431SS Manuel De L'utilisateur

HEATING CONTROL

SPEED CONTROL

High/Low Seting
ON/OFF Seting
HAND DRYER ON/OFF
The hand dryer has a ON/OFF setting on the circuit board to allow you to turn ON/OFF the hand dryer. The Hand Dryer
should be set to "OFF" position during installation.
Note: The Hand Dryer is set to "ON". The unit will work "out of the box" once the power cable
connection is connected.
The hand dryer provides two different heat options to allow you to set
the comfort setting.
Set to "ON" for warm dry of the hand.
Set to "OFF" for cool dry of the hands.
Note: The Heating Control is set to "ON" or Warm Dry mode.
Heat switch
The hand dryer provides two different speed settings which allow
you to control the speed and sound of hand drying.
Set to "HI" for maximum dry setting speed - recommended for
high volume locations. In "HI" setting, the decibel sound of the
hand dryer will be louder.
Set to "LOW" for reduced noise, but slightly longer dry time. This
setting may ideally be used for lower volume locations.
Note: The Speed Control is set to "HI" for maximum
dry speed time.
7
RTHD-431SS