Safe Installation - Blaupunkt 5CG2 Série Manuel D'utilisation

1.5 Safe installation
WARNING ‒ Risk of electric shock!
Improper installation is dangerous.
Connect and operate the appliance only in accordance with the
▶
specifications on the rating plate.
Connect the appliance to a power supply with alternating cur-
▶
rent only via a properly installed socket with earthing.
The protective conductor system of the domestic electrical in-
▶
stallation must be properly installed.
Never equip the appliance with an external switching device,
▶
e.g. a timer or remote control.
When the appliance is installed, the mains plug of the power
▶
cord must be freely accessible. If free access is not possible, an
all-pole isolating switch must be installed in the permanent elec-
trical installation according to the installation regulations.
When installing the appliance, check that the power cable is not
▶
trapped or damaged.
If the insulation of the power cord is damaged, this is dangerous.
Never let the power cord come into contact with heat sources.
▶
WARNING ‒ Risk of explosion!
If the appliance's ventilation openings are sealed, a leak in the re-
frigeration circuit may result in a flammable mixture of gas and air.
Keep ventilation openings, in the appliance enclosure or in the
▶
built-in structure, clear of obstruction.
WARNING ‒ Risk of fire!
It is dangerous to use an extended power cord and non-approved
adapters.
Do not use extension cables or multiple socket strips.
▶
If the power cord is too short, contact Customer Service.
▶
Only use adapters approved by the manufacturer.
▶
Portable multiple socket strips or portable power supply units may
overheat and cause a fire.
Do not place portable multiple socket strips or power supply
▶
units on the back of the appliance.
Safety en
27