Publicité
Les langues disponibles
Les langues disponibles
▶
Allow the hot cup heater to cool
down before touching it.
Tips
¡ You can activate and deactivate the
cup heater in the basic settings.
→ "Overview of the basic settings",
Page 27
¡ Place the cups with their base on
the cup heater to heat the cups per-
fectly.
Home Connect
This appliance is network-capable.
Connecting your appliance to a mobile
device lets you control its functions via
the Home Connect app, adjust its basic
settings and monitor its operating
status.
Home Connect services are not avail-
able in every country. The availability of
the Home Connect function depends
on the availability of Home Connect
services in your country. You can find
information about this at: www.home-
connect.com.
To be able to use Home Connect, you
must first set up the connection to the
WLAN home network (Wi-Fi
the Home Connect app.
There are various ways to connect to
your home network, depending on the
features of your appliance:
¡ → "Connecting appliance to WLAN
home network (Wi-Fi) with WPS func-
tion", Page 23
¡ → "Connecting appliance to WLAN
home network (Wi-Fi) without WPS
function", Page 24
The Home Connect app will guide you
through the entire login process. Follow
the instructions in the Home Connect
app to configure the settings.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
1
) and to
Tips
¡ Please consult the Home Connect
documents supplied.
¡ Please also follow the instructions in
the Home Connect app.
Notes
¡ Please note the safety precautions in
this instruction manual and make
sure that they are also observed
when operating the appliance via the
Home Connect app.
→ "Safety", Page 8
¡ Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible to
operate the appliance using the
Home Connect app.
Connecting appliance to
WLAN home network (Wi-Fi)
with WPS function
Using your router's WPS function is the
simplest way of connecting the appli-
ance to your home network.
Requirement: Your router has a WPS
button. You will find information about
this in the manual for your router.
Press
.
1.
Use
or
2.
nect" and press
Use
or
3.
Wi-Fi" and press
Use
or
4.
and press
.
Use
or
5.
nect" and press
a The appliance starts the connection
process.
Press the WPS button on the router
6.
within the next 2 minutes.
a If "Network connection successful."
is shown on the display, the connec-
tion process is complete.
Home Connect en
to select "Home Con-
.
to select "Switch on
.
to select "Connect"
to select "autoCon-
.
23
Publicité
