Fasten Charge Point - Lucid Connected Home Charging Station Mode D'emploi

1. Fasten mounting bracket.
4-Hole Mounting
2-Hole Mounting
2. Refer to the following table for torque
specifications:
Screw Torque
M4 10 kgf.cm
3. Screw holes of the mounting bracket.
Installation

Fasten Charge Point

Fasten the charge point onto mounting
bracket.
8.5 lb-in
1. If the user is planning to use a "Top or
back input" and "Ethernet cable", drill
the appropriate holes before mounting
to any surface.
2. Insert the Ethernet grommet (included)
after drilling Ethernet hole if the
user requests an Ethernet connection
installation.
13