Element T6 Max" from the list and wait for the pairing process
complete. After completed, you can command your speaker
via Alexa.
Note: Confirm you have turned on the speaker and it is under
Bluetooth searching and pairing mode, or you can not find the
device on the Bluetooth list.
7. Aux-in Mode
Simply connect the speaker with your non-Bluetooth device via
the 3.5 mm audio jack cable.
Note: After plugging in an audio cable, the speaker will
automatically switch to Aux-in mode. Over the Aux-in mode,
control audio playback via the connected device, and there is
no automatic power-off function.
8. Auto-power Off
The speaker will power off automatically after 10 minutes if it
does not pair with any device through Bluetooth. When in low
battery, the speaker will power off automatically as well.
9. Volume + / -
There are 16 levels of volume settings and 8 LED indicators.
Two levels correspond to one LED. The maximum 16 levels of
volume with all LED lights on while the mute state without any
LED light.
10. Charging
When in low battery, there will have a sound prompt every 15
seconds. After the third time prompt, the speaker will
power-off automatically.
Red
Goes off
Turn ON/OFF: Hold for 2 seconds.
Reset: Hold for 8 - 10 seconds to reset to factory
default settings.
In charging state
Fully charged
06