Appliance Equipment - BOMANN SBS 7308 IX Mode D'emploi

Unpacking the appliance
 Remove the appliance from its packaging.
 Remove all packaging material, such as foils, filler
and cardboard packaging.
 To prevent hazards, check the appliance for any
transport damage.
 In case of damage, do not put the appliance into
operation. Contact your distributor.
CAUTION: Transport protection!
Pull off the foil from the appliance sides.
NOTE:
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter "Cleaning and Maintenance".

Appliance Equipment

Appliance overview
A Freezer
1 Door storage racks
2 Glass shelves
3 Freezing drawers
B Fridge
4 Glass shelves
5 Freezing drawers
6 Door storage racks
Delivery scope
Fridge:
4x glass shelf, 2x vegetable box, 5x door
storage rack, 1x egg tray
Freezer:
4x glass shelf, 2x freezing drawer, 5x door
storage rack, 2x ice-cube tray
Conditions for the installation location
 Good ventilation is required around the appliance
to dissipate the heat properly and to guarantee ef-
ficient cooling operation at low power consump-
tion. Enough clearance is necessary.
Gap to the back approx. 50～70 mm, to the
-
side walls and above the device each approx.
min. 100 mm;
Place the appliance so that the appliance door
-
can open without being impeded.
 Only install at a location with an ambient tempera-
ture suitable for the climate class of the appliance.
For information on the climate class, please refer
to the "EU Product Data Sheet" or to the rating la-
bel located in the interior or on the appliance rear.
 Place the appliance on a steady and safe surface.
If the appliance is not horizontally leveled, adjust
the feet accordingly.
 Avoid the installation:
near heaters, next to a stove, direct sunlight or
-
any other heat sources;
at locations with high humidity (e.g. outdoors,
-
bathroom), as metal parts would be suscepti-
ble to corrosion under such circumstances;
43
Installation