Electrical Safety - Power Fist 8642969 Mode D'emploi

V 4.3
4. Never mix combustible substances.
5. Never reach with your hand or any other object into the mixing container during
the mixing process.
6. Wear protective gloves, a dust mask, close-fitting clothes and sturdy shoes when
operating the tool.
7. To maintain complete control, firmly hold your tool with both hands. Do not place
hands over air vents. Proper cooling of the motor is necessary to ensure normal
life of the tool.
8. This tool will not stop moving immediately. Do not lay the tool down or leave it
unattended until it has come to a complete stop. A part that is moving could make
the tool jump or grab a surface and pull the tool out of your control.

ELECTRICAL SAFETY

1. Disconnect power supply. Disconnect the tool from the power supply when not in
use, before cleaning, servicing or changing any parts.
2. Protect yourself against electric shocks when working on electrical equipment.
Avoid body contact with grounded surfaces such as pipes, radiators, cooking
stoves and refrigerators. There is an increased chance of electrical shock if your
body is grounded.
3. Double insulated tools are equipped with a polarized plug (one blade is wider than
the other.) This plug will fit in a polarized outlet only one way. If the plug does not
fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician to install a polarized outlet. Do not change the plug in any way. Double
insulation eliminates the need for a three wire grounded power cord and grounded
power supply system.
4. Grounded tools must be plugged into an outlet that is properly installed and
grounded in accordance with all codes and ordinances. Never remove the
grounding prong or modify the plug in any way. Do not use any adapter plugs.
Check with a qualified electrician if you are in doubt as to whether the outlet is
properly grounded. If the tool should electronically malfunction or break down,
grounding provides a low resistance path to carry electricity away from the user.
5. Do not abuse the cord. Never use the cord to carry tools or pull the plug from an
outlet. Keep the cord away from heat, oil, sharp edges or moving parts. Do not
operate this tool if the power cord is frayed or damaged. Replace damaged cords
immediately. Damaged cords increase the risk of electric shock. Do not modify the
plug in any way.
Visit www.princessauto.com for more information
9A Electric Mixer 8642969
5