Sending From A Computer By Usb; Using With A Memory Card - Parrot DF3120 Mode D'emploi

2. Sending from a computer by USB

NOTE: THE PARROT DF3120 FEATURES 10 MO OF STORAGE SPACE: TO
SAVE SPACE, REMEMBER TO RESIzE YOUR PICTURES BEFORE COPYING
THEM TO THE INTERNAL MEMORY.
1. Connect the Parrot DF3120 to
your PC with the USB cable.
> The computer detects a new device.
2. Copy your jPEG (except CMYK) or
GIF pictures to the Parrot DF3120.
3. Disconnect the cable from the Parrot DF3120.
The Parrot DF3120 automatically saves the pictures.
4. Repeat the procedure if you wish to transfer new pictures.

3. Using with a memory card

1.Insert the memory card into the
appropriate slot.
> The jPEG and GIF pictures
stored on the memory card are
displayed.
2. Select the «Copy» icon.
Select one of the following options as required:
- Copy current picture
- Copy selected pictures (in this case, you must select
the pictures that you wish to copy by using the Select
and Enter buttons, select the Exit icon
and then confirm your choice)
- Copy all pictures
3. Confirm your choice.
> The selected photos are resized and copied to the internal
memory.
NOTE: IF YOU WISH TO SWITCH BACK TO THE INTERNAL MEMORY,
SELECT THE USE INTERNAL MEMORY ICON.
15