Electrolux ERC19001W8 Notice D'utilisation page 27

10. Remove the hinge. Put over the pin in the
direction of the arrow. Install the hinge on
the opposite side.
3
11. Tighten the hinge.
10) If foreseen
12. Put the top in position.
13. Push front the top.
14. Screw both screws on the rear side.
15. Remove and install the handle
2
1
16. Reposition, level the appliance, wait for
Do a final check to make sure that:
• All screws are tightened.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in Win-
ter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fit-
ting of the gasket.
In case you do not want to carry out the
above mentioned operations, contact the
nearest After Sales Service Force. The After
Sales Service specialist will carry out the re-
versibility of the doors at your cost.
opposite side.
1
2
at least four hours and then connect it to
the power socket.
electrolux 27
10)
on the
3