Operation; Selecting Negative-Ion Generation; Selecting Mode And Speed Settings - Nikken Air Wellness Power 5 Pro Manuel Du Propriétaire

Do not use the Power5 Pro in a room where there is high humidity (over 80%) or
extreme temperature change. It is recommended that the Power5 Pro not be used in
a room where the temperature is lower than 32°F (0°C) or exceeds 90°F (32°C).
See the safety information for other restrictions regarding use of the Power5 Pro.

Selecting mode and speed settings

The MODE button selects the operating mode.
Sleep feature: In the auto mode, the unit will automatically set to a
quiet running speed after the room goes dark and remains darkened for three
minutes. When the room lightens, the Power5 Pro will reset to full auto mode after
four minutes.
The DUST setting operates the unit at alternating speeds from level 1 (for
approximately 30 minutes) to level 3 (approximately 10 minutes) and is suitable
for exceptionally dusty conditions.
The SILENT setting maintains a lower fan speed, when quiet operation is
desired.
The TURBO setting is the most powerful. It is useful for cleaning the room air
as quickly as possible.
The SPEED button adjusts the fan speed manually. Pressing this
button will override the mode setting.

OPERATION

To return the unit to operation in one of the selected modes, press
the MODE button for the desired result.

Selecting negative-ion generation

The –ION button activates or turns off the negative-ion generator. The unit can be
operated with the ion generator on or off. The ion generator is automatically activated
if no selection is made.
In AUTO the mode will automatically adjust the fan speed up
or down based on the condition of the room air as measured
by the particle sensor.
All manuals and user guides at all-guides.com
-10-