Warn ZEON Instructions De Montage page 4

4. Snap the dust cover into the vehicle mounted plug to keep it clean when not in use. The lanyard can be attached to one of the
cables or to other locations.
NOTE: The quick-connect plug mounted on the vehicle and wired to the battery makes an ideal point to connect booster cables. A
heavy duty 16 foot set of boosters made for this purpose is available from Warn dealers under part number 26771.
CARELESS INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY OR EQUIPMENT DAMAGE. READ AND UNDERSTAND ALL
SAFETY PRECAUTIONS AND OPERATING INSTRUCTIONS BEFORE INSTALLING AND OPERATING THIS PRODUCT.
©2012 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
Quick Disconnect
Drill two ¼" holes in the location of your choice
1/4-20 x 1 1/2 hex head capscrew
¼ lock washer
¼-20 hex nut
FIGURE 2
4 987960A0