Sauder Summit Station Serie Instructions De Montage page 6

Step 1
Assemble your unit on a carpeted fl oor or on the empty carton to
å
avoid scratching your unit or the fl oor.
Push twenty HIDDEN CAMS (1F) into the ENDS (A and B),
å
MODESTY PANEL (C), UPRIGHT (D), BOTTOM (E), BACK (M), and
BRACE (N). Then, insert the metal end of a CAM DOWEL (2F) into
each HIDDEN CAM.
Do not tighten the HIDDEN CAMS in this step.
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Hole
M
N
Page 6
The arrow in the HIDDEN
CAM must point toward the
hole in the edge of the board.
B
E
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/service/tips
A
D
Arrow
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
425015
Arrow
2F
Metal end
(20 used)
C
www.sauder.com/service
1F