Sauder Summit Station Serie Instructions De Montage page 20

Step 15
First, fi ll the hole in the RIGHT END (A) 1/4 to 1/2 full
å
with GLUE.
Next, fasten the RIGHT END (A) to the BOTTOM (E),
å
BACK (M), BRACE (N), and TOP (T). Tighten seven
HIDDEN CAMS.
NOTE: You may need to lift the BACK (M) up slightly
å
to align the holes.
NOTE: Be sure the WOOD DOWEL in the BRACE (N)
å
inserts into the RIGHT END (A). Wipe away the
excess GLUE.
Fasten the BACK (M) to the UPRIGHT (D). Tighten
å
two HIDDEN CAMS.
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
S
A
Page 20
E
M
N
D
T
425015
Maximum
Arrow
210 degrees
Minimum
190 degrees
NOTE: Tighten two HIDDEN
CAMS to fasten the BACK (M)
to the UPRIGHT (D).
177M
Fill the holes 1/4 to 1/2 full with GLUE.
www.sauder.com/service