Sauder Summit Station Serie Instructions De Montage page 21

Step 16
Fasten the PENCIL DRAWER BACK (D540) to the PENCIL DRAWER SIDES (D266 and D267). Use
å
two BLACK 1-9/16" FLAT HEAD SCREWS (30S).
Slide the PENCIL DRAWER BOTTOM (B51) into the grooves in the PENCIL DRAWER SIDES (D266
å
and D267) and PENCIL DRAWER BACK (D540).
Fasten the PENCIL DRAWER BOX FRONT (D541) to the PENCIL DRAWER SIDES (D266 and D267).
å
Use two BLACK 1-9/16" FLAT HEAD SCREWS (30S).
NOTE: Be sure the PENCIL DRAWER BOTTOM (B51) inserts into
å
the groove of the PENCIL DRAWER BOX FRONT (D541).
Fasten the PENCIL DRAWER FRONT (O) to the
å
PENCIL DRAWER BOX FRONT (D541). Use four
BLACK 7/8" LARGE HEAD SCREWS (17S).
30S
BLACK 1-9/16" FLAT HEAD SCREW
(4 used in this step)
17S
BLACK 7/8" LARGE HEAD SCREW
(4 used for the DRAWER FRONT)
www.sauder.com/service
The holes are
closer to this edge.
D267
D540
D267
O
D541
425015
D540
Groove
D266
B51
D541
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BOX groove.
D266
Page 21