Sauder Summit Station Serie Instructions De Montage page 19

Step 14
Slide the FRONT/BACK MOLDINGS* (J) onto the
å
notched edges of the BOTTOM (E).
Fasten the BOTTOM (E) to the LEFT BOTTOM
å
MOLDING (H). Tighten two HIDDEN CAMS.
*U.S. Patent No. 5,499,886
å
The groove
is closer to
this edge.
The groove
is closer to
this edge.
www.sauder.com/service
Notched edge
J
These surfaces
should be even.
E
425015
Maximum
210 degrees
Minimum
190 degrees
E
Notched edge
J
H
Arrow
Page 19