Publicité
Step 11
Fill the holes in the TOP (K) 1/4 to 1/2 full with GLUE (54M).
å
Fasten the LEFT END (B) to the TOP (K). Tighten two TWIST-LOCK®
å
FASTENERS. Wipe away the excess glue.
NOTE: Be sure the WOOD DOWELS in the LEGS insert into the holes in
å
the TOP.
Fill the holes 1/4 to 1/2 full with GLUE.
www.sauder.com/services
54M
B
Meet Part (K). This component has
been engineered to be lighter, stronger,
faster... well ok. Not technically faster.
But defi nitely makes for a sturdier
Lateral File that' s easier to assemble
and friendlier to the environment.
How to use the SAUDER TWIST-LOCK
1. Insert the dowel end of the FASTENER into the hole
of the adjoining part.
NOTE: The dowel end of the FASTENER must remain
fully inserted in the hole of the adjoining part while
locking the FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver
as tight as possible.
54M
K
422975
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
®
FASTENER
Dowel end
This groove
must be here.
Page 15
Publicité
