How To Use Control Lever - HUROM H-AI Serie Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

18

How to Use Control Lever

 The lever is located next to the juice outlet on the chamber.
] Juice Extraction Mode
CLOSE
[
[◑] Finishing Mode
[
◯ ] Cleaning Mode
OPEN
Note
If the hopper does not open easily after use, set the lever to ◑ (Half Open) and turn the dial to [REV] for
3~5 seconds and stop. Repeat this twice or three times. You will be able to open it easily afterwards.
For better extracting efficiency,
set the lever to [
CLOSE ].
After all ingredients go down the chamber set, turn the
lever to [
] (Half Open) and run the juicer until no more
pulp comes out of the juicer.
You need to discharge pulp to open the hopper easily.
When detaching and cleaning the chamber, turn the lever
to [OPEN ◯] completely. You can easily and conveniently
clean the chamber.
You cannot move the control lever to [OPEN ◯] position
when the chamber is placed on the main body.

Publicité

Table des Matières
loading

Table des Matières