Parts Identification - Power Fist 8435992 Mode D'emploi

8435992
UNPACKING
1. Carefully remove the parts and accessories from the box. Retain packaging material until you have carefully
inspected and satisfactorily installed or operated the tool.
2. Make sure that all items in the parts list are included.
3. Inspect the parts carefully to make sure the tools and accessories were not damaged while shipping.
WARNING! Do not operate the tool if any part is missing. Replace the missing part before operating. Failure to
do so could result in a malfunction and serious personal injury.

PARTS IDENTIFICATION

Contents:
• Air saw
• 32T blade
• 24T blade
• 2 pc files
• Hex key
ASSEMBLY
Air saw comes preassembled.
OPERATION
To engage the tool, hold the tool and use your fingers to push back the safety latch on the throttle lever. Release
lever to stop to the tool.
To change blade:
1. Unscrew locking nut near work guide using hex key
2. Remove blade/insert new blade
3. Tighten locking nut with hex key
Visit www.princessauto.com for more information
Air Reciprocating Saw V 2.1
11