Sauder 411905 Instructions D'assemblage page 13

Step 9
Refer to the enlarged diagram to identify the parts on
å
the HINGES.
The DOOR may need some adjustments. Follow the text
å
below to make needed adjustments.
DOOR ADJUSTMENTS:
å
To adjust the DOOR up or down (vertical) turn the
adjusting screw in or out.
To adjust the DOOR side to side (horizontal), loosen all
å
horizontal adjustment screws. Move the DOORS side to
side to the desired location. Tighten the screws after
making adjustments.
To adjust the DOOR in or out (depth), loosen the mounting
å
screw one turn and move the DOOR in or out, as needed.
Tighten the mounting screw after making adjustments.
www.sauder.com/services
Adjusting screw (vertical)
Mounting screw (depth)
411905
(horizontal adjustment)
Page 13