Plebani Fast Mode D'emploi page 26

If you decide to fix car- seat on front seat, you should keep it as far away as possible from
the dashboard, with its back-rest as vertical as possible.
If the car has adjustable position belts, put at the lowest position.
Left side view (Fig. 6)
Put car-seat on seat and secure it by passing the car's belts into slots as per following
illustration. We suggest you to fully unroll belts for easy installation. Pull both belts inside
the body of car-seat and let them out from the opposite side (where the belts are buckled
car).
Pull the shoulder belt inside of the metal buckle and then in the slot below. At the end
pass the horizontal belt in the slot marked with blue label on the base of the shell of the
car seat.
Right side view (Fig. 7)
Pass horizontal belt in the slot marked with blue label on the base of the shell of the car
seat.
After checking that all steps have been made correctly, pull and tension the belts. Open
red fixing clip (Fig. 8), put both vehicle belts inside it, close and lock it (Fig. 9).
IMPORTANT: ALWAYS MAKE SURE THAT CAR'S BELTS ARE NOT ROLLED AND/OR
TWISTED!
Now your "FAST" car-seat is ready for use; to remove it, follow the above steps in reverse
order.
Before lay down and ensure your child inside car-seat, read the sections "adjustment" of
the seat as described below.
FIXING CAR-SEAT FROM 9 TO 18 KG
If you previously used, close the "stabilizer foot" pushing it into under the seat; make sure
it's totally locked.
Car-seat is provided with an adapter pillow to be used only when the child is small. As the
child grows it is necessary to remove it. To remove it, make as explained in "ADAPTOR
PILLOW REMOVING".
To use "FAST" car-seat in this configuration, put it on the selected seat (we recommend
the back seat opposite to driver) and follow these simple instructions.
If you decide to fix car- seat on front seat, you should keep it as far away as possible from
the dashboard, with its back-rest as vertical as possible. If the car has adjustable position
belts, put at the lowest position.