- Important Note: This manual, images, warnings, and all material contained therein refer
to a particular version of the product. Some parts and/or features may be changed due
to the constant improvements made to the products.
This car-seat must be installed ONLY ON SEATS WITH 3-POINT RESTRAINT SYSTEM
approved by UN/ECE 16 or other equivalent standards. IT'S PROHIBITED fix it on seats
with lap belt or abdominal.
DANGER!: DO NOT USE ON PASSENGER SEATS PROVIDED WITH AIRBAGS.
CHECKING OF CAR'S BELTS
Your car-seat must be installed on seats with 3-point safety belts with diagonal and lap
belts, static or with winders, on front seats or rear passenger seats. It can not be installed
on seats with only the diagonal or two anchor points belt (Fig. 1).
CORRECT PLACEMENT IN CAR
WARNING: The car seat should not be placed on the passenger seat with AIRBAG
installed or activated.
"FAST" can be installed on front seat, if NOT equipped with Airbags, or with Airbags OFF,
both on the rear of the car. It NOT can be placed on OPPOSITE-facing or SIDE-facing
direction seats (Fig. 2). If you put it on the front seat, this must NOT be fitted with Airbags
or Airbag must be DISABLED. However, the optimum and safer location for your car-seat
is the REAR seats, specially the rear seat, on the opposite side to the driver.
Install "FAST" only on seats properly secured to the structure of the car and turned in
direction of travel. Do not leave folding or rotating car seats not well hooked, they are a
source of danger in case of accident.
Gruop 0+ (From 0 to 13 Kg): Install car-seat in the REAR-FACING direction (Fig. 3) (Use
Stabilizer Foot).
Gruop 1 (From 9 to18 Kg): Install car-seat in FORWAR-FACING direction (Fig. 4).
CAR-SEAT FIXING FROM 0 TO 13 KG
To use "FAST" car-seat in this configuration, pull out the stabilizer foot (Fig. 5A) located
under the seat shell until the complete exit (Fig. 5B). Put it on the selected seat (we
recommend the back seat opposite to driver) and follow these simple instructions.
IMPORTANT!: