Home Connect; Connecting The Appliance To A Wlan Home Net- Work (Wi-Fi) With Wps Function; Connecting The Appliance To A Wlan Home Network (Wi-Fi) Without Wps Function - Bosch B36CT Série Manuel D'utilisation

en-us Home Connect™
The frozen items should no longer be stored for the
▶
maximum storage period.
The temperature alarm can be switched on in the following
cases:
¡ The appliance is switched on.
Do not store any food until the appliance has reached
the set temperature.
¡ Large quantities of fresh food are being placed inside.
Switch on Super freezing before placing large quantities
of food in the appliance.
¡ The freezer compartment door is open for too long.
Check whether the frozen food has defrosted or
thawed.
Switching off the temperature alarm
Press .
▶
a The warning tone is switched off.
a The temperature display (freezer compartment) briefly
indicates the warmest temperature reached in the
freezer compartment. The temperature display (freezer
compartment) then indicates the set temperature again.
a From this time on, the warmest temperature is recalcu-
lated and saved.
10 Home Connect™ Home Connect™
This appliance is network-capable. Connecting your appli-
Home Connect™
ance to a mobile device lets you control its functions via
the Home Connect™ app.
Home Connect™ services are not available in every coun-
try. Availability of the Home Connect™ function depends
on the availability of Home Connect™ services in your
country. You can find information on this at: www.home-
connect.com.
To be able to use Home Connect™, you must first set up
the connection to the WLAN home network (Wi-Fi
the Home Connect™ app.
After switching on the appliance, wait at least 2 minutes
until internal device initialization is complete. Only then
should you set up Home Connect™.
¡ Connecting appliance to WLAN home network (Wi-Fi)
with WPS function → Page 16
¡ Connecting appliance to WLAN home network (Wi-Fi)
without WPS function → Page 16
The Home Connect™ app will guide you through the en-
tire registration process. Follow the instructions in the
Home Connect™ app to make the settings.
Tips
¡ Please consult the Home Connect™ documents sup-
plied.
¡ Please also note the information in the Home Con-
nect™ app.
Notes
¡ Please also note the safety information in this instruc-
tion manual and ensure that it is also observed when
operating the appliance using the Home Connect™
app.
→ "Safety", Page 3
¡ Operating the appliance on the appliance itself always
takes priority. It is not possible to operate the appliance
using the Home Connect™ app during this time.
1 Wi-Fi is a registered trade mark of the Wi-Fi Alliance.
16
10.1 Connecting the appliance to a WLAN
home network (Wi-Fi) with WPS func-
tion
If your router has a WPS function, you can connect the ap-
pliance to your WLAN home network (Wi-Fi) automatically.
Press
1.
lights up and the submenu display shows
a
Press
2.
display shows
shows .
Press
3.
a The submenu display shows an animation for 2 min-
utes. The appliance is ready for automatic connection to
the WLAN home network (Wi-Fi).
Activate the WPS function on the router during this pe-
4.
riod.
To do this, take note of the information in the docu-
ments for your router.
a If the connection is successful,
menu setting display.
If the submenu display shows
5.
able to establish a connection to the WLAN home net-
work (Wi-Fi).
Check whether the appliance is located within the
‒
range of the WLAN home network (Wi-Fi).
→ "Checking the signal strength", Page 17
Repeat the process or connect manually
‒
→ Page 16 .
Connect the appliance to the Home Connect app.
6.
→ Page 17
10.2 Connecting the appliance to a WLAN
home network (Wi-Fi) without WPS
1 ) and to
function
If your router does not have a WPS function, you can con-
nect the appliance to your WLAN home network (Wi-Fi)
manually. The appliance briefly sets up its own WLAN net-
work. You can connect a mobile device to the WLAN net-
work and transfer the network information for the WLAN
home network (Wi-Fi) to your appliance.
Requirement: The Home Connect™ app has been in-
stalled on your mobile device.
Press
1.
lights up and the submenu display shows
a
Press
2.
display shows
shows .
Press
3.
a The appliance now sets up its own WLAN network with
the network name "HomeConnect".
a The submenu setting display shows an animation. The
appliance is ready for manual connection to the WLAN
home network (Wi-Fi).
Follow the instructions in the Home Connect™ app on
4.
the mobile device.
a The network information for the WLAN home network
(Wi-Fi) is transferred to the appliance.
.
/ (Submenu) repeatedly until the submenu
and the submenu setting display
(Submenu setting).
flashes in the sub-
, the appliance was un-
.
/ (Submenu) repeatedly until the submenu
and the submenu setting display
(Submenu setting).
⁠ .
⁠ .